Fonte, F.; De Gaspari, A.; Riccobene, L.; Toffol, F.; Malik, S.; Marchetti, L.; Ricci, S.; Mantegazza, P.; Livne, E. Development of a Wind Tunnel Model for Active Flutter Suppression Studies, in: AIAA Scitech 2019 Forum, AIAA, 2019, ISBN: 9781624105784, p. 1-14, AIAA 2019-2029 [AIAA Scitech 2019 Forum, San Diego, CA, USA, 7-11 Jan. 2019], DOI: 10.2514/6.2019-2029
Ameduri, S.; Concilio, A.; Dimino, I.; Pecora, R.; Ricci, S., Airgreen2 - Clean Sky 2 Programme: Adaptive Wing Technology Maturation, Challenges and Perspectives, in: ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2018), San Antonio, TX, USA, 10-12 Sept. 2018, ISBN: 9780791851944, p. 1-10, SMASIS2018-8235, DOI: 10.1115/SMASIS2018-8235
De Gaspari, A.; Gilardelli, A.; Ricci, S.; Airoldi, A.; Moens, F., Design of a Leading Edge Morphing Based on Compliant Structures for a Twin-Prop Regional Aircraft, in: 2018 AIAA/AHS Adaptive Structures Conference - AIAA SciTech, Kissimmee, FL, USA, 8-12 Jan. 2018, ISBN: 9781624105319, p. 1-19, AIAA 2018-1063, DOI: 10.2514/6.2018-1063
De Gaspari, A.; Gilardelli, A.; Ricci, S.; Airoldi, A.; Moens, F., Design of a Leading Edge Morphing Based on Compliant Structures in the Framework of the CS2-AIRGREEN2 Project, in: ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2018), San Antonio, TX, USA, 10-12 Sept. 2018, ISBN: 9780791851944, p. 1-9, SMASIS2018-8246, DOI: 10.1115/SMASIS2018-8246
Fonte, F.; Iannaccone, G.; Cimminiello, N.; Dimino, I.; Ricci, S., Active Load Control of a Regional Aircraft Wing Equipped with Morphing Winglets, in: ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2018), San Antonio, TX, USA, 10-12 Sept. 2018, ISBN: 9780791851944, p. 1-12, SMASIS2018-8167, DOI: 10.1115/SMASIS2018-8167
Fonte, F.; Toffol, F.; Ricci, S., Design of a Wing Tip Device for Active Maneuver and Gust Load Alleviation, in: 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference - AIAA SciTech, Kissimmee, FL, USA, 8-12 Jan. 2018, ISBN: 9781624105326, p. 1-18, AIAA 2018-1442, DOI: 10.2514/6.2018-1442
Ameduri, S.; Brindisi, A.; Amendola, G.; Andreutti, G.; Toffol, F.; Fonte, F.; Ricci, S., Definition, Design Assessment and Parameterization of s Metasensor for Lc&a and Load Monitoring Purposes, Paper presented at: 24th Conference of the Italian Association of Aeronautics and Astronautics (AIDAA 2017), Palermo - Enna, Italy, 18-22 Sept. 2017, p. 1-14
Fonte, F.; Ricci, S.; Mantegazza, P., Wind Tunnel Evaluation of a Static Output Feedback Controller for Gust Load Alleviation on a Regional Aircraft, in: 17th International Forum on Aeroelasticity and Structural Dynamics (IFASD 2017), Como, Italy, 25-28 June 2017, ISBN: 9788897576280, p. 1-14
Malik, S.; Riccobene, L.; Ricci, S.; Monti, D., Development of a Buffet Load Mitigation System Based on Multi-Surface Control, in: 17th International Forum on Aeroelasticity and Structural Dynamics (IFASD 2017), Como, Italy, 25-28 June 2017, ISBN: 9788897576280, p. 1-20
Ricci, S.; Beretta, J.; Fonte, F.; Monti, D., Active Control for Buffet Load Alleviation on the Fin of a High Performance Training Aircraft, in: 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference - AIAA SciTech 2017, AIAA, 2017, ISBN: 9781624104534, p. 1-11, AIAA 2017-1819 [58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference - AIAA SciTech 2017, Grapevine, TX, USA, 9-13 Jan. 2017], DOI: 10.2514/6.2017-1819
Ricci, S.; De Gaspari, A.; Fonte, F.; Riccobene, L.; Toffol, F.; Mantegazza, P.; Karpel, M.; Roizner, F.; Wiberman, R.; Weiss, M.; Cooper, J.E.; Howcroft, C.; Calderon, D.; Adden, S., Design and Wind Tunnel Test Validation of Gust Load Alleviation Systems, in: 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference - AIAA SciTech 2017, AIAA, 2017, ISBN: 9781624104534, p. 1-12, AIAA 2017-1818 [58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference - AIAA SciTech 2017, Grapevine, TX, USA, 9-13 Jan. 2017], DOI: 10.2514/6.2017-1818
Toffol, F.; Fonte, F.; Ricci, S., Design of an Innovative Wing Tip Device, in: 17th International Forum on Aeroelasticity and Structural Dynamics (IFASD 2017), Como, Italy, 25-28 June 2017, ISBN: 9788897576280, p. 1-16
Veiberman, R.; Weiss, M.; Karpel, M.; Fonte, F.; Travaglini, L.; Ricci, S., Aeroservoelastic Response of Nonlinear Wind Tunnel Model to Non-Uniform Gust Field, in: 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2016, Curran Associates, Red Hook, NY, 2016, ISBN: 9781510820609, p. 3024-3037, AIAA 2016-1486 [57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference - AIAA SciTech 2016, San Diego, CA, USA, 4-8 Jan. 2016], DOI: 10.2514/6.2016-1486
De Gaspari, A.; Ricci, S.; Riccobene, L., Design, Manufacturing and Wind Tunnel Test of a Morphing Wing Based on Compliant Structures, in: 24th AIAA/AHS Adaptive Structures Conference 2016, Curran Associates, Red Hook, NY, 2016, ISBN: 9781510820463, p. 307-324, AIAA 2016-1316 [24th AIAA/AHS Adaptive Structures Conference - AIAA SciTech 2016, San Diego, CA, USA, 4-8 Jan. 2016], DOI: 10.2514/6.2016-1316
Fonte, F.; Riccobene, L.; Ricci, S.; Adden, S.; Martegani, M., Design, Manufacturing and Validation of a Gust Generator for Wind Tunnel Test of a Large Scale Aeroelastic Model, in: 30th Congress of International Council of the Aeronautical Sciences (ICAS 2016), 2016, ISBN: 9783932182853, p. 1-9 [30th Congress of International Council of the Aeronautical Sciences (ICAS 2016), Daejeon, South Korea, 25-30 Sept. 2016]
Bindolino, G.; Ghiringhelli, G.L.; Ricci, S.; Terraneo, M., Winbox Weight Estimation for Metallic and Composite Manufacturing in a Conceptual Design Phase, Paper presented at: 23rd Conference of the Italian Association of Aeronautics and Astronautics (AIDAA 2015), Torino, Italy, 17-19 Nov. 2015, p. 1-20
De Gaspari, A.; Ricci, S.; Adden, S.; Martegani, M., Design and Manufacturing of an Aero-Servoelastic Wind Tunnel Model for Experimental Validation of Gust Load Alleviation Technologies, Abstract presented at: 23rd Conference of the Italian Association of Aeronautics and Astronautics (AIDAA 2015), Torino, Italy, 17-19 Nov. 2015, p. abstract-2
De Gaspari, A.; Ricci, S.; Travaglini, L., Aeroelastic Analysis of a Regional Aircraft with Active Camber Morphing Device, Paper presented at: 16th International Forum on Aeroelasticity and Structural Dynamics (IFASD 2015), St Petersburg, Russia, 28 June-2 July 2015, p. 1-28, IFASD-2015-149
De Gaspari, A.; Ricci, S.; Travaglini, L.; Cavagna, L.; Antunes, A.; Odaguil, F.; Lima, G., Active Camber Morphing Wings Based on Compliant Structures: an Aeroelastic Assessment, in: 23rd AIAA/AHS Adaptive Structures Conference 2015, Curran Associates, Red Hook, NY, 2015, ISBN: 9781510801073, p. 302-320, AIAA 2015-1054 [23nd AIAA/AHS Adaptive Structures Conference - AIAA SciTech 2015, Kissimmee, FL, USA, 5-9 Jan. 2015], DOI: 10.2514/6.2015-1054
Fu, X.; Ricci, S.; Bisagni, C., Multi-Scale Analysis and Optimisation of 3D Orthogonal Woven Composite Structures Combining the Response Surface Method and Genetic Algorithms, Paper presented at: 23rd Conference of the Italian Association of Aeronautics and Astronautics (AIDAA 2015), Torino, Italy, 17-19 Nov. 2015, p. 1-20
Ricci, S.; Adden, S.; Servadio, C.; Karpel, M.; Cooper, J., Wind Tunnel Experimental Validation of Future Green Regional A/C Gust Load Alleviation Control System, Paper presented at: 16th International Forum on Aeroelasticity and Structural Dynamics (IFASD 2015), St Petersburg, Russia, 28 June-2 July 2015, p. 1-13, IFASD-2015-057
Travaglini, L.; Ricci, S.; Bindolino, G., Introduction and application of PyPAD, a framework for multidisciplinary airframe design, in: 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2015, Curran Associates, Red Hook, NY, 2015, ISBN: 9781510801141, p. 480-508, AIAA 2015-0186 [56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference - AIAA SciTech 2015, Kissimmee, FL, USA, 5-9 Jan. 2015], DOI: 10.2514/6.2015-0186